X-Ray Generator Error Codes

X-Ray Generator Error Reference

*Note: Brand-specific hain — general categories*

### High Voltage Errors

HV Fault / kV Error

High voltage circuit issue. Exposure stop karein. Engineer required.

mA Feedback Error

Tube current incorrect. Technique settings check karein. Engineer agar persist.

### Tube Errors

Tube Warm-up Required

Warm-up protocol run karein. Cold tube mein full exposure nahi karni chahiye.

Anode Overtemp

Exposure frequency reduce karein. Cool down wait karein.

Filament Fault

Tube filament issue. Engineer required — tube replacement possible.

### Communication Errors

Console Communication Lost

Cable check karein. Restart karein. Engineer agar persist.

AEC Error (Automatic Exposure Control)

AEC chambers check karein. AEC calibration verify karein. Engineer.

### Power Errors

Low Line Voltage

Input power check karein. Stabilizer/transformer check karein.

Phase Failure (3-phase generators)

All 3 phases present hain verify karein. Electrician contact karein.

Error Response Protocol

Difficulty: Reference